Sunlu PLA Glow-in-the-Dark Filament (White-Green)
The Sunlu PLA Glow-in-the-Dark filament in white and green is an excellent choice for those who want to give their 3D prints a unique, eye-catching look. The material contains phosphorescent components that allow it to glow in the dark after absorbing light energy, creating a striking glow. The intensity of the effect is even greater after exposure to UV light, making this filament ideal for creating decorations, gadgets, decorative models, or elements that stand out after dark. However, keep in mind that this type of material should not be exposed to direct sunlight for long periods, as this may accelerate color fading.
Precision you can rely on
Sunlu has ensured high manufacturing precision for the filament, so the material provides stable and predictable performance during printing. A diameter of 1.75 mm and dimensional accuracy of ±0.03 mm result in even filament feed and greater print consistency. This is particularly important for projects requiring an aesthetic finish and high repeatability. The 1 kg spool allows for convenient printing of both smaller models and more complex projects without the need for frequent material changes.
Ready to use
The filament has been designed with your convenience and smooth printer operation in mind. Before packaging, it is dried for 24 hours and then placed in vacuum-sealed packaging with a desiccant inside a resealable nylon bag. This protection helps keep the material in optimal condition and reduces the risk of printing issues. As a result, Sunlu PLA Glow In The Dark supports clog-free and bubble-free printing, allowing you to focus fully on creating rather than troubleshooting technical issues.
Wide Compatibility
Sunlu PLA Glow In The Dark works with all popular FDM 3D printers that support 1.75 mm filament, so you can easily adapt it to your equipment. High manufacturing standards and a tight diameter tolerance ensure the material works seamlessly with many devices, delivering stable and satisfying results. This is the perfect choice for users seeking an eye-catching glow-in-the-dark material, as well as quality, reliability, and ease of use at every stage of printing.
| Manufacturer | Sunlu |
|---|---|
| Model | PLA Glow W-G |
| Color | White-green |
| Filament diameter | 1.75/3.0 mm |
| Tolerance | ±0.02 mm |
| Printing temperature | 200–210°C |
| Bed temperature | No heating: apply adhesive / Heating 50–65°C: do not apply adhesive |
| Tensile strength (kgf) | 11–16 (factory standard at 23°C, wire diameter 1.75 mm) |
| Melting rate | 7–9 g/10 min (190°C, 2.16 kg) (according to GB/T 3682.1-2018) |
| Elongation at break | 4% (in-house standard at 23°C, wire diameter 1.75 mm) |
| Melting temperature | 165–180°C |
| Heat deflection temperature | 55°C |
| Density g/cm³ | 1.24 |
| Water absorption | 0.5% |
| Recommended printing speed | 50–100 mm/s |
| Bubbles | 100% bubble-free |
| Weight | 1 kg/roll |
| Length | 1.75 mm (1 kg) = 330 m, 3.0 mm (1 kg) = 330 m, 3.0 mm (1 kg) = 330 m, 3.0 mm (1 kg) 3.0 mm (1 kg) = 110 m |
Atsiliepimai
Atsiliepimų dar nėra.