MOES S03-CS-EU-MS Smoke and Carbon Monoxide Detector
Keep your family safe with the MOES S03-CS-EU-MS detector, which continuously monitors carbon monoxide levels and the presence of smoke. The device uses electrochemical technology and a photoelectric smoke sensor, and if a hazard is detected, it triggers an audible alarm exceeding 85 dB and a red warning light. The easy-to-read display shows the current CO concentration, air temperature, and humidity, while a three-color indicator makes it easy to assess the situation. Additionally, the built-in 1000 mAh rechargeable battery provides temporary power during power outages. It’s a practical solution for homes, apartments, or RVs that helps quickly detect potential hazards.
Effective Carbon Monoxide and Smoke Detection
Carbon monoxide is colorless and odorless, making it difficult to detect without a proper sensor. The MOES S03-CS-EU-MS uses electrochemical technology to monitor CO concentrations in the range of 0 to 999 ppm, with a resolution of 0.5 ppm. The default alarm threshold is 49 ppm, which provides early warning of rising concentrations of this hazardous substance. The device is also equipped with a photoelectric smoke sensor that helps detect signs of fire.
Three-level indication—quick assessment of the situation
The sensor uses a three-color LED ring that indicates the current hazard level. A green light indicates a CO concentration between 0 and 49 ppm, yellow indicates values between 50 and 99 ppm, and red warns of concentrations of 100 ppm or higher. The indicator pulses in the corresponding color, allowing you to easily recognize changes in conditions without having to analyze the readings on the screen. At low CO concentrations, the device does not emit an audible alarm; however, the warning level is signaled every 2 minutes, and the hazardous level every second.
A loud alarm to warn you of danger
If a hazard is detected, the MOES S03-CS-EU-MS triggers an audible alarm exceeding 85 dB and a bright red warning light. The combination of both signaling methods increases the likelihood of noticing the danger, even while sleeping. A flashing red LED ring further attracts attention and makes it easier to identify the alarm device. The sensor also features an audible alarm mute function, which can be operated using a button located on the front panel.
Easy-to-read display with additional measurements
The MOES S03-CS-EU-MS allows you to conveniently monitor environmental conditions via a large, color display. In addition to the current carbon monoxide concentration in ppm, the device displays temperature and relative humidity. The humidity measurement range is from 0% to 95% RH, with a tolerance of ±5% under non-condensing conditions. Individual values are displayed in different colors, making them easy to distinguish and read quickly. Furthermore, the screen brightness can be adjusted to suit your preferences and the room’s lighting conditions.
Emergency Power Supply in Case of a Power Outage
The sensor is powered directly from an electrical outlet with a voltage of 100–240 V and a frequency of 50/60 Hz. It is also equipped with a built-in 1000 mAh lithium-ion battery, which serves as a backup power source. In the event of a power outage, the device can automatically switch to battery power, ensuring that environmental monitoring continues temporarily.
Convenient operation and thoughtful design
Operating the MOES S03-CS-EU-MS is simple thanks to the intuitive control panel located below the display. The central button is used to turn on the device and run a self-test, while additional buttons allow you to adjust the brightness and toggle mute on and off. A large LED ring provides clearly visible visual indicators, and the compact housing, measuring 125.5 × 60.5 × 36.3 mm, takes up very little space. In addition, the replaceable plug allows for convenient replacement of the power cord without the need for tools.
Safety in Various Rooms
The MOES sensor is ideal for many locations where there is a risk of carbon monoxide or smoke. It can be used, among other places, in the kitchen, a living room with a fireplace, a bathroom with a water heater, a bedroom, a motorhome, or a hotel room. It is also suitable for areas related to vehicle operation, where exhaust fumes may be present. The housing, made of flame-retardant ABS plastic, ensures a sturdy construction, and the operating temperature range of -10°C to 50°C allows for use in a variety of conditions. Thanks to its compact size and standard wall outlet power supply, the sensor can be conveniently placed in any desired location.
Included in the set
- MOES sensor x1
- User manual x1
- Power plug x1
- Packaging safety insert x1

Atsiliepimai
Atsiliepimų dar nėra.