Smart Remote Control Hub + 3x SwitchBot Temperature and Humidity sensor
Looking for devices that will turn your home into a Smart Home? he Smart Hub with Temperature and Humidity Sensors from SwitchBot will help you with this task! This equipment will allow accurate measurements, as well as convenient control through a dedicated app. From today you will be able to monitor conditions in any room and outbuilding! What’s more, the smart thermo-hygometer exhibits IP65 protection, so you can use it equally outside and inside without any obstacles.
Resistant to various conditions
The SwitchBot sensor will be very comfortable to use, as it is resistant to various conditions. It exhibits an IP65 rating, which means it is dust and waterproof, so you can safely use it equally outdoors and indoors. It will prove ideal for kitchens, bathrooms, but also greenhouses and more! What’s more, its battery will last up to 2 years, so you can enjoy its long and reliable operation!
Accurate measurements
The intelligent control panel, combined with temperature and humidity sensors, guarantees highly accurate measurements. The waterproof sensors, which can be located outdoors, take temperature measurements in the range of 0-65°C with a tolerance of ±0.2°C, and humidity measurements in the range of 10-90% with a tolerance of ±1.8% RH. What’s more, you’ll be able to quickly read their actual measurements, thanks to a 4-second refresh rate. So you can easily control everything!
Voice control
You don’t have to worry about complicated controls. The Hub Mini, included in the kit, will allow you to control by voice. It works with Amazon Alexa, Google Home, Siri Shortcuts, SmartThings or IFTTT. This will let you know what the humidity is in the bathroom or the temperature in the kitchen with just one command.
Dedicated app
Want easy access to the data you read? All you have to do is download the dedicated SwitchBot app to your smartphone, which is available equally on Google Play and App Store. With its help, you can set the parameters you want in a given place, and when they are exceeded, the app will immediately send you a notification. This will allow you to react quickly. From today you will have everything under control!
Easy data reading
Forget about difficult graphs and long data analysis. With SwitchBot you can easily read your measurement data. They are shown in the form of colorful graphs so you won’t have any doubts! What’s more, you can see them on a yearly, monthly, daily or hourly basis.
Convenient data storage
You can store measurement data conveniently in two ways. Locally, using a Bluetooth connection, your data will be stored for 68 days. You can also choose to save in the cloud – you can store measurements there for up to 2 years! What’s more, you can such export them as a csv file to analyze the environment even more deeply. From now on, you will always have all the information you need at your fingertips!
Included
- Intelligent control panel
- 3 x temperature and humidity sensor
- Hub Mini
| Producer | SwitchBot |
|---|---|
| Model | HubMini+OutdoorMeter |
| Sensors | |
| Temperature range |
-20 ℃ to 60 ℃1. With pre-installed zinc-manganese batteries: -20 ℃ to 60 ℃2. When replaced with lithium batteries: -40 ℃ to 60 ℃ |
| Storage conditions | Temperature: -40 ℃ to 60 ℃; Time: ≤ 6 months |
| Temperature accuracy |
-20 to 0 ℃(±0.4°C, ±0.6°C /maximum); 0 to 65 ℃ /32 to 149 ℉ (±0.2°C, ±0.4°C maximum); 65 to 80 ℃ /149 to 176 ℉ (±0.4°C, ±0.6°C maximum) |
| Humidity range | 0 to 100% relative humidity |
| Humidity accuracy |
0 to 10% RH (±3% typical, ±5% maximum); 10% to 90% relative humidity (±1.8% typical, ±3.5% maximum); 90% to 99% relative humidity (±3% typical, ±5% maximum) (at 25°C ambient relative humidity) |
| Battery detection | Supports battery detection and low battery notifications |
| Data refresh interval | 4s |
| Local data storage | 68 days |
| Data storage in the cloud | At least 2 years |
| Numbers supported by Hub | 120 units. |
| Power source | AAA*2 |
| Weather resistance | IP65 |
| Connectivity | Bluetooth 4.2 |
| Connection distance | 120m in open space |
| HUB mini | |
| Material | ABS |
| Compatibility | Android 4.3+, iOS 10.0+, watchOS 1.0+ |
| Operating environment | -10°C~60°C / 5-95% relative humidity |
| Power input | DC 5V ⎓ 1A |
| BLE | 4.2 or higher |
| Bluetooth range | 120 m/394 feet line of sight in ideal conditions without obstructions. |
| Bluetooth technology | Proprietary low-power BLE technology with mesh networking support |
| Third-party services | Alexa, Google Assistant, Siri Shorcuts, IFTTT, SmartThings |
| Other | Learning mode: 1. Intelligent learning2. Manual selection3. Individual (DIY) |
Atsiliepimai
Atsiliepimų dar nėra.