Inateck HB2027

Enhanced performance when connected with multiple devices: When charging your computer, transfering data and outputing video simultaneously, USB 3.0 hubs might experience video lag, data transfer interruption or data loss due to high load while the USB 3.2 Gen 2 hub HB2027 can carry twice the data processing capacity of a USB 3.0 HUB. Thus, even with all the interfaces in use, the hub can run smoothly.

Increased data rates
Even connected with M.2 NVME drives, USB 3.0 hubs can only transfer data at up to 500+ MB/s which HB2027 can reach higher transfer speed. Please see comparison table below for details.

Power Delivery Input
This port supports up to 100W power input. Please keep the information below in mind:

1.All the hubs themselves consume power when in use. HB2027 itself will consume 15W power so the actual charging power will be slightly less than the charger’s rated power, which generally won’t make any difference.When the computer runs a high power consumption program and all the usb ports on the hub are connected with devices, the devices might run abnormally due to slow charging speed or insufficient power supply if the connected original power adapter of the computer is low in power (e.g. MBA comes with a 30W charger.).

2.The maximum 100W input power supported by the hub has a threshold value and the actual charging power is determined by the charger. If you expect 85W charging power, please make sure both the charger and the charging cable support 100W charging power.

4K Video Output
The HDMI port supports up to 4K@30Hz resolution and it is backward compatible with 1080p@60Hz.

Extended 50cm Cable
A 50cm cable comes with the hub to allow you to adjust the cable length freely.It’s an ideal option in various scenarios, which can, for example, prevent the hub falling off when placing the laptop on a stand.