MOES ZSS-HM-CO-A-MS Carbon Monoxide Detector
Ensure your safety and that of your loved ones with the MOES ZSS-HM-CO-A-MS carbon monoxide detector. The device uses advanced electrochemical technology to detect carbon monoxide (CO)—a highly toxic gas that is colorless, odorless, and tasteless. If a hazard is detected, it triggers an 85 dB audible alarm (measured at a distance of 3 meters) and a visual alert, enabling a quick response. Thanks to ZigBee 3.0 support, the sensor can also send notifications to a mobile app and integrate with other smart home devices. It has a service life of up to 10 years, and its maximum detection radius is 6 meters.
Effective Detection of Dangerous Gas
The MOES ZSS-HM-CO-A-MS uses an electrochemical carbon monoxide sensor and digital temperature compensation to ensure accurate hazard detection. The device complies with the EN 50291-1:2018 standard, and the alarm activation time depends on the CO concentration in the air. At a concentration of 50 ppm, the alarm activates within 90 minutes at the latest; at 100 ppm, within 40 minutes; and at 300 ppm, within a maximum of 3 minutes. Four audible alerts and four flashes of a red LED, repeated every 5 seconds, signal the detection of a hazard. This allows household members to quickly respond to the presence of gas, which cannot be detected by the senses.
Remote Notifications and Smart Features
Thanks to ZigBee 3.0 support, the MOES sensor can become part of a smart home. Once connected to a ZigBee gateway, you gain access to notifications in the mobile app, which alerts you to carbon monoxide detection, when levels return to normal, and when the battery is low. This allows you to monitor the safety of your household members even when you’re away. The Smart Linkage feature also enables integration with other smart home devices and the creation of smart action scenarios. Communication stability is supported by Anti-RF Interference protection. A ZigBee gateway, sold separately, is required to use network features.
Clear Messages and Automatic Diagnostics
The sensor is equipped with a three-color LED indicator that makes it easy to monitor its status. A green LED indicates normal operation, a red LED signals an alarm, and a yellow LED warns of a low battery, a malfunction, or the end of the sensor’s service life. The device also offers a self-test function—simply press the button on the housing to check the operation of the visual and audible alerts. An additional convenience is the Hush mode, which allows you to temporarily silence an unwanted alarm for about 10 minutes or a low-battery warning for about 12 hours. This makes the sensor easy to use and its status simple to monitor.
Up to 10 years of reliable protection
The electrochemical sensor used has a service life of up to 10 years, allowing you to use the device for a long time. The sensor is powered by two AA LR6 alkaline batteries, each with a voltage of 1.5 V, which can provide up to 5 years of operation without needing to be replaced. After inserting the batteries, a startup process lasting approximately 100 seconds begins, after which the device automatically enters standby mode. Proper operation is indicated by a green LED that flashes every 30 seconds. The built-in diagnostic system also alerts you to any potential malfunctions, making it easier to keep the sensor in proper working order.
Compact Design and Convenient Installation
The MOES ZSS-HM-CO-A-MS features a compact housing measuring 85 × 85 × 27.5 mm, so it doesn’t take up much space. It can be mounted on a wall or ceiling in a suitable location within a residential building, such as a bedroom, hallway, or basement. The device operates at temperatures ranging from -10°C to +40°C and at relative humidity levels from 0% to 95%, without condensation. The housing is equipped with air inlets, a buzzer, an LED indicator, and a button for testing, silencing, and pairing. Installation should be performed by a qualified installer. Please note that the sensor detects carbon monoxide only—it does not replace smoke, fire, or combustible gas detectors, nor does it exempt you from regular inspections of heating equipment and ventilation systems.
Included in the set
- MOES ZSS-HM-CO-A-MS carbon monoxide sensor x1
- Mounting bracket x1
- AA batteries x2
- Screws x2
- Wall anchors x2
- User manual

Atsiliepimai
Atsiliepimų dar nėra.