X-Sense XC0C-iR Wi-Fi carbon monoxide detector
The X-Sense XC0C-iR is a Wi-Fi-enabled carbon monoxide detector that combines classic home protection with instant notifications on a mobile app. In the event of an emergency, it notifies you with a loud alarm, a clear message on the screen and an alert on your phone, allowing you to react even when no one is home.
In-app notifications
When connected to the X-Sense Home Security app, the sensor sends real-time notifications, showing the current CO concentration in ppm during an alert. The app also notifies you of pre-alerts, low battery levels and possible device malfunctions, and allows you to view your carbon monoxide alarm history. It is possible to share the sensor with other household members, so that alert notifications go to several people at once. A 2.4GHz Wi-Fi connection is required for the smart function to work.
Two-stage alerting
The XC0C-iR supports two warning levels – a preventive alarm and a full CO alarm. When the concentration of carbon monoxide is elevated, but has not yet reached the alarm threshold, you will receive an alert in the app. If the CO level persists longer, the sensor enters full alert mode, sounding a beep and sending another notification.
Precise CO measurement.
The high-performance electrochemical CO sensor provides accurate and stable measurements of carbon monoxide concentration. The device meets the requirements of EN 50291-1:2018, which means that the alarm triggers at specific time intervals depending on the level of CO detected.
Easy-to-read display and signaling
The backlit LCD display shows the current CO concentration in ppm, allowing quick assessment of the situation without reaching for the phone. It is complemented by LED signaling that indicates the device’s operating status, alarm, battery problems or malfunction.
Loud local alarm
When a dangerous concentration of carbon monoxide is detected, the sensor triggers an audible alarm with a volume of at least 85 dB. The signal is clearly audible, so it warns occupants of the house even while they are sleeping.
One-click silencing
The alarm can be silenced locally with the Test/Silence button or remotely in the mobile app when the situation is checked and deemed safe. The mute function works temporarily, after which the sensor automatically returns to normal standby mode.
Flexible mounting
The sensor can be placed on a flat surface or mounted on a wall using the included mounting hardware. It is recommended that the device be placed in an area where the occupants of the house are in daily life – away from obstacles that may restrict the free flow of air, so that detection is as effective as possible.
Exceptional durability
The device has an expected lifespan of up to 10 years. Power is provided by a replaceable battery, and a notification system alerts you to low power, malfunction or end of life, allowing you to maintain the highest level of security.
Included:
- Carbon monoxide detector
- CR123A 3 volt battery
- Mounting screw x2
- Spacer pin x2
- Supporting label for hole spacing
- User manual
| Manufacturer | X-Sense |
|---|---|
| Model | XC0C-iR |
| Power supply | 1 × CR123A 3 V battery (replaceable) |
| Battery life | Up to 1 year (when tested once a week) |
| Product lifetime | 10 years |
| Sensor type | electrochemical |
| Safety standards | EN 50291-1:2018 |
| CO alarm response time. | 50 ppm: 60-90 minutes 100 ppm: 10-40 minutes 300 ppm: 0-3 minutes |
| Operating temperature | 4.4 to 37.8°C |
| Operating humidity | 10 to 85% RH (non-condensing) |
| Alarm volume | ≥ 85 dB from a distance of 3 m |
| Alarm silencing time | ≤ 9 minutes |
| Wi-Fi operating frequency | 2400-2483.5 MHz |
| Maximum RF power | 100 mW |
| Weight | 148 g |
| Dimensions | 142 × 75 × 32 mm |
Atsiliepimai
Atsiliepimų dar nėra.