MOES S03-CO-EU-MS Carbon Monoxide and Temperature Sensor
Keep your home safe with the MOES S03-CO-EU-MS detector, which monitors carbon monoxide (CO) levels 24/7 and also measures air temperature and humidity. The device uses a precise AetherSentinel sensor and a 3-level warning system with a colored LED ring, an 85 dB audible alarm, and a visual indicator. It is also equipped with a clear LCD display with a resolution of 240 × 296, which allows you to monitor measurement results in real time. Furthermore, the built-in 1000 mAh rechargeable battery provides up to 12 hours of operation in the event of a power outage. Thanks to its design, which allows it to be plugged directly into an outlet, the detector is ideal for use both at home and in a RV.
Precise Carbon Monoxide Detection
The MOES S03-CO-EU-MS is equipped with an advanced AetherSentinel sensor, which is resistant to chemical poisoning and maintains measurement accuracy even under demanding gas conditions. The sensor detects carbon monoxide concentrations ranging from 0 to 999 PPM with an accuracy of ±10%, and its measurement resolution of 0.5 PPM allows it to detect even slight changes in carbon monoxide levels. With real-time monitoring, you can continuously monitor air quality and quickly respond to emerging hazards.
Three alert levels—quick response to hazards
The detector uses a 3-level alarm system that indicates the current carbon monoxide concentration via a colored, pulsating LED ring, on-screen icons, and audible alerts. At concentrations between 0 and 49 PPM, the device glows green and does not emit any sounds. When the CO level rises to 50–99 PPM, the ring turns yellow, and a warning signal sounds every 2 minutes. Once the level exceeds 99 PPM, a red alarm is triggered, accompanied by a flashing light and an audible alert every second. This allows you to immediately recognize the level of danger and take appropriate action.
Loud Alarm and Clear Visual Alerts
In an emergency, it’s crucial to warn household members quickly. That’s why the MOES S03-CO-EU-MS combines an 85 dB siren with an intense red strobe light, providing simultaneous audible and visual alerts. Additionally, at a warning level of 50–99 PPM, you can temporarily mute the buzzer using a dedicated button. Muting applies only during the current warning cycle—if the concentration drops to a safe level and then rises again, the audible alarm will sound once more. For safety reasons, the red alarm cannot be turned off or muted.
Monitor Air Temperature and Humidity
MOES is not only a carbon monoxide detector but also a practical environmental monitor. The device measures temperature in the range of -10°C to 50°C with an accuracy of ±1.5°C and relative humidity from 0% to 95% RH with an accuracy of ±5%. This allows you to easily check the conditions in the room and respond appropriately to any changes. What’s more, a short press of a dedicated button lets you switch the temperature units between Celsius and Fahrenheit.
Color Display—All Information at Your Fingertips
A large, high-definition color LCD screen with a resolution of 240 × 296 provides convenient access to the most important information. It shows the current carbon monoxide concentration in PPM, a 3-level hazard indicator, temperature, and relative humidity. The display also features icons indicating battery status, mute mode, and the status of the audible alarm. Thanks to its wide viewing angle, reading the data is easy, and the 3-level brightness adjustment—full, medium, or off—allows you to customize the backlight to your preferences, even when using the device at night.
Up to 12 hours of protection without mains power
You don’t have to worry that a temporary power outage will immediately interrupt carbon monoxide monitoring. The MOES S03-CO-EU-MS has a built-in 1000 mAh battery that provides up to 12 hours of emergency operation. On a daily basis, the device is powered directly from an outlet and supports a voltage of 100–240 V at a frequency of 50/60 Hz. This combination of mains and battery power ensures continuous protection even during unexpected power outages.
Easy Installation and Convenient Operation
Installing the detector requires no complicated steps—simply plug it directly into an electrical outlet. The rotatable, interchangeable plug module with a release button makes it easy to adjust the device’s connection. You also have buttons to adjust screen brightness, control the mute function, and run a self-test. The power button turns the device on and off when running on battery power, while when plugged into the mains, it is used to perform a function check—the detector cannot be turned off at that time. This keeps daily operation simple and intuitive.
Well-thought-out design and durable housing
The MOES sensor measures 125.5 × 60.5 × 36.3 mm without the plug, so it doesn’t take up much space. Its housing is made of flame-retardant ABS plastic, and ventilation openings on the sides allow air to be drawn in for measurements. The device can operate at temperatures ranging from -10°C to 50°C, allowing it to be used in a variety of conditions. Its design, which allows for direct connection to a power outlet, makes it suitable for use in both residential spaces and recreational vehicles.
Check the Detector’s Operation
The MOES S03-CO-EU-MS features a self-test function that allows you to verify the device’s operation. To run the self-test, simply press the power button while the detector is plugged into an electrical outlet. Regular testing helps ensure the detector is ready to alert you to dangerous levels of carbon monoxide. Also, remember not to block the ventilation openings and to ensure the device has adequate airflow.
Included in the package
- MOES NA503B detector x1
- User manual x1
- Power plug x1
- Packaging insert x1

Atsiliepimai
Atsiliepimų dar nėra.